DP832 -RIGOL

 

SUPEROFERTA !! DP832

16% DE DESCUENTO

ANTES $357.750 +IVA
AHORA $300.510 +IVA

$357.607

Unidades Limitadas.

Contactanos a: contacto@tecel.cl
(562)23341332 / (562)23341492


  • 3 Outputs; total power up to 195W
  • Low Ripple Noise <350 uVrms/2mVpp
  • Fast transient response time: <50 us
  • Channel isolation: CH1 || CH2,CH3
  • OVP/OCP/OTP protection functions
  • Built in V, A, W measurements and waveform display
  • Support for output Delay, Analysis, Monitor, and Preset functions
  • 3.5 inch TFT Display
  • Connectivity including USB Host & Device, LAN, and Digital IO
Model DP832
Channels 3
DC Output (0°C to 40°C )
Voltage/current CH1: 0 to 30V/0 to 3A
CH2: 0 to 30V/0 to 3A
CH3: 0 to 5V/0 to 3A
OVP/OCP CH1: 10mV~33V/1mA~3.3A
CH2: 10mV~33V/1mA~3.3A
CH3: 10mV~5.5V/1mA~3.3A
Load Regulation Rate ±(Output Percentage + Offset)
Voltage <0.01%+2mV
Current <0.01%+250uA
Linear Regulation Rate ±(Output Percentage + Offset)
Voltage <0.01%+2mV
Current <0.01%+250uA
Ripples and Noise (20Hz to 20MHz)
Normal Mode Voltage <350μVrms/2mVpp
Normal Mode Current <2mArms
Common Mode Current <1.5μArms
Annual Accuracy [1] (25°C ±5°C ) ±(Output Percentage + Offset)
Programming Voltage 0.05% + 10mV
Current 0.2% + 10mA
Readback Voltage 0.05% + 5mV
Current 0.15%+ 5mA
Resolution
Programming Voltage 10mV
With high-resolution option:
1mV
Current 1mA
Readback Voltage 10mV
With high-resolution option:
0.1mV
Current 1mA
With high-resolution option:
0.1mA
Display Voltage 10mV
With high-resolution option:
1mV
Current 10mA
With high-resolution option:
1mA
Transient Response Time
Less than 50μs for output to recover to within 15mV following a change in output current from full load to half load or vice versa.
Command Processing Time [2]
<118ms
Temperature Coefficient per? (Output Percentage + Offset)
Voltage CH1/CH2: 0.01%+5mV
CH3: 0.01%+2mV
Current 0.01%+2mA
Stability [3] ±(Output Percentage + Offset)
Voltage CH1/CH2: 0.02%+2mV
CH3: 0.01%+1mV
Current

Interesados y Consultas: contacto@tecel.cl